User`s guide

iv SGI
®
Altix
®
XE210 User’s Guide
Product Contents
Your SGI Altix XE210 server system ships with the following items:
• Altix XE210 server board installed in the server system
• One 600W power supply module installed in the server system
• A box of hardware components, referred to below as the "hardware box"
• Low-profile riser installed in the server system
• Full-height profile riser installed in the server system
• Optical drive tray assembly in the hardware box (optional)
• Bridge board, installed in the server system (optional)
• Optical drive cable installed in the server system (optional)
• Chassis intrusion switch integrated into the server system riser
• One 32-6mm flat screw for installing the optical drive component in the hardware
box (optional)
• Rack handles in the hardware box
• Peripheral bay filler panel in the hardware box
• Control panel installed in the server system
• Passive backplane installed in the server system
• Active backplane (optional)
Note: The number and type of other custom items (processors, memory, disks, PCI cards,
software, etc.) vary with your order.
Product Support
SGI provides a comprehensive product support and maintenance program for its products.
For a description of this program, do one of the following:
• See http://www.sgi.com/support/.
• If you are in North America, contact the Technical Assistance Center at
1 (800) 800 4SGI or contact your authorized service provider.
• If you are outside North America, see the following website for the appropriate
Customer Service phone number: http://www.sgi.com/support/supportcenters.html.