User`s guide

22 SGI
®
Altix
®
XE210 User’s Guide
Removing and Installing the Front Bezel
The diagram shows the front bezel. Note its orientation; the control panel is at the right. If
you are installing a bezel on your server system, make sure you position it as shown.
Figure 13. The Front Bezel
Removing the Front Bezel
Use the steps below if your system includes a front bezel.
1. Unlock the bezel.
2. Disconnect any cables attached to the control panel.
3. Pull the bezel from the server system.
Figure 14. Removing the Front Bezel
TP02197
TP02199