User`s guide

84 SGI
®
Altix
®
XE210 User’s Guide
Assert NMI on PERR Enable
Resume on AC Power Loss Stay off Last state Last state
Clear System Event Log Disable
FRB-2 Enable Enable
O/S Boot Watchdog Timer Disable
Plug & Play BMC Detection Disable
Console Redirect
Console Redirect Disable SerialB SerialB
Flow Control ------ RTS/CTS RTS/CTS
Baud Rate ------ 115.2K 115.2K
Terminal Type ------ VT100 VT100
Legacy OS Redirection ------ Enable Enable
System Information Use this option to view FRU data, and BMC, FRU, and HSC Revision
data.
Boot Options (Standalone [Non-clustered] Systems and Head Nodes)
Boot Timeout 0
Boot Option #1 Primary Master
CDROM
Boot Option #2 #300 IDM1 LUN0 ATA
Boot Option #3 IBA GE Slot 0500 v
Boot Option #4 LSI MPI BOOT
SUPPORT
Boot Option #5 EFI Shell
Hard Disk Order Use this option to specify the drive order.
Network Device Order Use this option to specify the network device order.
Boot Options (Compute Nodes)
(Typically, compute nodes do not have CD-ROMs, and the IBA (Pixie) boot device is placed before the hard disk
drive in the list of boot devices, as shown in the following settings.)
Boot Timeout 0
Boot Option #1 IBA GE Slot 0500 v
Boot Option #2 #300 IDM1 LUN0 ATA
Table 6. Settings on the Advanced Screen (Cont’d)
Option Standard Settings
Differences
XE240 Active XE210