Technical data

59
Chapter 5
5. System Configuration and Operation
This chapter describes how to configure and operate your system correctly.
Warning: The rackmount system operates on 200-240 VAC. Use extreme caution
when working around this voltage. Never install or remove power cords without first
turning off the equipment.
Caution: The rackmount system can weigh up to 750 pounds when fully configured.
Use at least two people to move the system chassis and take care that the system does not
tip or become unbalanced. Also use at least two people to move the monitors. Be sure to
practice proper lifting techniques.
Customer maintenance is limited to the outside of the chassis, which contains the
peripherals. No user-serviceable parts are found within the chassis.
Note: This product requires the use of external shielded cables in order to maintain
compliance with Part 15 of the FCC rules.