Technical data

MMSC
103
Powering On a Rack
Follow these instructions to power on an entire rack configuration through the MMSC
display.
1. Select the “Focus” menu on the display using the direction keys, then press the
Enter key.
Make sure that the “Al” option is highlighted
2. Go to the “Action” menu on the display using the direction keys (see Figure 7-4).
3. Select the “Power Up” option and press the Enter key.
Figure 7-4 Action Menu Selection for MMSC Display
Focus Action View Configure
Power Down
Power Cycle
NMI
Reset
Power Up
1.0 Current target module all