User`s guide

Hot-Plug PCI Add-In Boards
007-4274-001 85
Figure 4-5 Rear Retention Latch
A. Hot-plug PCI add-in board
B. Close up of rear retention latch in the closed position
C. Rear retention latch in the closed position
Removing a Hot-Plug PCI Add-in Board
Warning: If the system has been running, any installed PCI add-in board on the
baseboard will be hot. To avoid the possibility of a burn, be careful when removing or
installing baseboard components, especially those that are located near processors.
Caution: Slot covers must be installed on all vacant expansion slots. This maintains the
electromagnetic emissions characteristics of the system and ensures proper cooling of
system components.
A
B
C