User`s guide

56 007-4274-001
3: Configuring Software and Utilities
Security Menu
You can make the following selections on the Security Menu. Enabling the Supervisor
Password field requires a password for entering Setup. The passwords are not case
sensitive.
Table 3-24 Security Menu
Feature Choices Description
User Password is Clear
Set
Status only; user cannot modify. Once set, this can
be disabled by setting it to a null string or by
clearing the password jumper on the baseboard
(see the 1450 Server Maintenance Guide).
Administrator Password is Clear
Set
Status only; user cannot modify. Once set, this can
be disabled by setting it to a null string or by
clearing the password jumper on the baseboard
(see the 1450 Server Maintenance Guide).
Set User Password Press Enter When the Enter key is pressed, the user is
prompted for a password; press Esc key to abort.
Once set, this can be disabled by setting it to a null
string or by clearing the password jumper on the
baseboard (see the 1450 Server Maintenance Guide).
Set Administrative
Password
Press Enter When the Enter key is pressed, the user is
prompted for a password; press the Esc key to
abort. Once set, this can be disabled by setting it to
a null string or by clearing the password jumper on
the baseboard (see the 1450 Server Maintenance
Guide).
Password on Boot Disabled
Enabled
If enabled and the user password is set, the system
prompts the user for a password before the system
boots.
Fixed Disk Boot Sector Normal
Write Protect
Write-protects the boot sector on the hard disk to
protect against viruses.
Secure Mode Timer Disabled
1,2,5,10,
or 20 min.
1or2hr.
Period of keyboard or PS/2 mouse inactivity
specified for secure mode to activate. A password
isrequiredforsecuremodetofunction.Cannotbe
enabled unless at least one password is enabled.