User`s guide

Using BIOS Setup
007-4274-001 39
• When you have moved the CMOS jumper on the baseboard to the “Clear CMOS”
position (enabled); for a step-by-step procedure, see the 1450 Server Maintenance
Guide.
In the preceding three conditions, the following prompt is displayed:
Press <F2> to enter SETUP
In a fourth condition, when CMOS/NVRAM has been corrupted, the following prompts
aredisplayed,butnotthe<F2>prompt:
Warning: cmos checksum invalid
Warning: cmos time and date not set
In this condition, the BIOS loads default values for CMOS and attempts to boot.
Setup Menus
Setup has six major menus and several submenus:
1. Main Menu
• Primary IDE Master and Slave Adapters
• Processor Settings Information
2. Advanced Menu
• PCI Configuration
– Embedded Video Controller
– Embedded Legacy SCSI
– Embedded Dual Ultra 160 SCSI
– Embedded NIC
–PCIDevices,Slots1-8
– Hot-Plug PCI Control
• Integrated Peripheral Configuration
•AdvancedChipsetControl