User`s guide

36 007-4274-001
3: Configuring Software and Utilities
Hot Keys
Table 3-2 shows the key combinations used to perform certain operations.
Server Setup
Utility (SSU)
Use for extended system configuration of onboard
resources and add-in boards, viewing the system event
log (SEL), setting boot device priority, or setting system
security options.
The SSU can be run from either the configuration
software CD or from a set of bootable diskettes. You can
create the diskettes from the CD.
Information entered via the SSU overrides information
entered via Setup.
“Using the System
Setup Utility (SSU)” on
page 68
FRUSDR Load
Utility
UsetoupdatetheFieldReplacementUnit(FRU),
Sensor Data Record (SDR), and Desktop Management
Interface (DMI) flash components.
“FRU and SDR Load
Utility” on page 71
BIOS Update
Utility
UsetoupdatetheBIOSorrecoverfromacorrupted
BIOS update.
“Upgrading the BIOS”
on page 75
Firmware
Update Utility
Use to update BMC flash ROM. “Using the Firmware
Update Utility” on
page 78
Table 3-2 Hot Keys
To do this: Press these keys
Clear memory and reload the operating system—this is
asystemreset.
<Ctrl+Alt+Del>
Secure your system immediately. <Ctrl+Alt>+hot key (Set your hot key
combination using the SSU or Setup.)
Enter the Adaptec SCSI Utility during BIOS POST. <Ctrl+A>
Table 3-1 Configuration Utilities
Utility Description and brief procedure Page