Specifications
Table Of Contents
- SGI™ 1400 Server Family Maintenance and Upgrades Guide
- List of Figures
- List of Tables
- About This Guide
- Working Inside the System
- Tools and Supplies Needed
- Safety: Before You Remove the Access Cover
- Warnings and Cautions
- Removing the System Access Cover
- Installing the Access Cover
- Working in the Subchassis and Electronics Bay
- Installing PCI Boards
- Removing a PCI option Board
- Removing the Front Panel Board
- Installing the Front Panel Board
- Removing the Diskette Drive
- Installing the Diskette Drive
- Peripheral Drives
- System Fans
- The Power Share Board
- Upgrading Baseboard Components
- SGI 1400 Server SCSI Backplane Installation
- Technical Reference
- Baseboard Connectors
- Main Power Connector
- Auxiliary Power
- Diskette Drive
- Front Panel Connector
- The SMM Connector
- The IPMB Connector
- VGA Video Port Connector
- Keyboard and Mouse
- Parallel Port
- Serial Ports A and B
- Universal Serial Bus
- Narrow SCSI Connector
- Wide SCSI Connector
- Internal IDE Connector
- The Hard Drive LED Connector
- ISA Connector Pinouts
- The PCI Connectors
- Baseboard Jumpers
- System I/O Addresses
- Memory Map Address Range
- Interrupts
- Video Modes
- Baseboard Connectors
- Equipment Log and Configuration Worksheets
- Environmental Specifications
- Chassis Warnings and Safety
- Index

74
Chapter 4: Technical Reference
The SMM Connector
Figure 4-6 shows the server management module (SMM) connector. Table 4-5 lists the
SMM connector pinouts.
Figure 4-6 Server Management Module (SMM) Connector
Table 4-5 Server Management Module Connector Pinouts
Pin Signal Description
1 CPU_SMI_L System Management Interrupt
2 LOCAL_I2C_SCL IPMB clock line
3 GND Ground
4 Reserved N/A
5 PWR_CNTRL_SFC_L Host power supply on/off control
6 LOCAL_I2C_SDA IPMB serial data line
7 5VSTNDBY +5V standby indication (power OK)
8 KEYLOCK_SFC_L Keyboard lock signal
9 CPU_NMI Nonmaskable interrupt indication
10 VCC3 3.3V power supply status input
11 RST_SFC_L Baseboard reset signal from Server Monitor
Module
12 GND Ground
13 GND Ground
14 Reserved N/A
15 SECURE_MODE_BMC Secure mode indication
16 GND Ground
17 SFC_CHASSIS_INSTRUSION_L Chassis intrusion indication
1
2
23
26