Specifications

30
Chapter 1: Working Inside the System
Figure 1-15 Removing the Existing Board from its Bracket
The components shown in Figure 1-15 are:
1. Screws that attach the existing board to the bracket
2. Existing PSB
3. Bracket
To correctly position the new board inside the chassis:
1. Insert the NON-BRACKET END, then push the other end down so that the two
slotsin thebracket slideover thecorresponding tabs onthe chassiswall. Figure 1-16
shows an example.
2. Use the two screws you removed earlier to attach the bracket to the chassis.
1
3
2