Specifications
Table Of Contents
- SGI™ 1400 Server Family Maintenance and Upgrades Guide
- List of Figures
- List of Tables
- About This Guide
- Working Inside the System
- Tools and Supplies Needed
- Safety: Before You Remove the Access Cover
- Warnings and Cautions
- Removing the System Access Cover
- Installing the Access Cover
- Working in the Subchassis and Electronics Bay
- Installing PCI Boards
- Removing a PCI option Board
- Removing the Front Panel Board
- Installing the Front Panel Board
- Removing the Diskette Drive
- Installing the Diskette Drive
- Peripheral Drives
- System Fans
- The Power Share Board
- Upgrading Baseboard Components
- SGI 1400 Server SCSI Backplane Installation
- Technical Reference
- Baseboard Connectors
- Main Power Connector
- Auxiliary Power
- Diskette Drive
- Front Panel Connector
- The SMM Connector
- The IPMB Connector
- VGA Video Port Connector
- Keyboard and Mouse
- Parallel Port
- Serial Ports A and B
- Universal Serial Bus
- Narrow SCSI Connector
- Wide SCSI Connector
- Internal IDE Connector
- The Hard Drive LED Connector
- ISA Connector Pinouts
- The PCI Connectors
- Baseboard Jumpers
- System I/O Addresses
- Memory Map Address Range
- Interrupts
- Video Modes
- Baseboard Connectors
- Equipment Log and Configuration Worksheets
- Environmental Specifications
- Chassis Warnings and Safety
- Index
iii
Contents
List of Figures vii
List of Tables ix
About This Guide xiii
1. Working Inside the System 1
Tools and Supplies Needed 1
Safety: Before You Remove the Access Cover 1
Warnings and Cautions 2
Removing the System Access Cover 3
Installing the Access Cover 3
Working in the Subchassis and Electronics Bay 5
Installing PCI Boards 7
Removing a PCI option Board 9
Removing the Front Panel Board 9
Installing the Front Panel Board 10
Removing the Diskette Drive 11
Installing the Diskette Drive 12
Peripheral Drives 13
Drive Cabling Considerations 13
IDE Requirements 13
SCSI Requirements 14
Installing 5.25-inch Peripherals in the Front Bays 14
Removing a 5.25-inch Peripheral from the Front Bay 18
Installing or Replacing the SCSI-B Cable 20