Specifications
Table Of Contents
- SGI™ 1400 Server Family Maintenance and Upgrades Guide
- List of Figures
- List of Tables
- About This Guide
- Working Inside the System
- Tools and Supplies Needed
- Safety: Before You Remove the Access Cover
- Warnings and Cautions
- Removing the System Access Cover
- Installing the Access Cover
- Working in the Subchassis and Electronics Bay
- Installing PCI Boards
- Removing a PCI option Board
- Removing the Front Panel Board
- Installing the Front Panel Board
- Removing the Diskette Drive
- Installing the Diskette Drive
- Peripheral Drives
- System Fans
- The Power Share Board
- Upgrading Baseboard Components
- SGI 1400 Server SCSI Backplane Installation
- Technical Reference
- Baseboard Connectors
- Main Power Connector
- Auxiliary Power
- Diskette Drive
- Front Panel Connector
- The SMM Connector
- The IPMB Connector
- VGA Video Port Connector
- Keyboard and Mouse
- Parallel Port
- Serial Ports A and B
- Universal Serial Bus
- Narrow SCSI Connector
- Wide SCSI Connector
- Internal IDE Connector
- The Hard Drive LED Connector
- ISA Connector Pinouts
- The PCI Connectors
- Baseboard Jumpers
- System I/O Addresses
- Memory Map Address Range
- Interrupts
- Video Modes
- Baseboard Connectors
- Equipment Log and Configuration Worksheets
- Environmental Specifications
- Chassis Warnings and Safety
- Index
System Setup Utility (SSU) Worksheets
135
Table A-31 Boot Menu
Floppy Check Disabled / Enabled
Multi-boot Support Disabled / Enabled
Maximum No. of I2O Drives 1 / 4
Message Timeout Multiplier 1 / 2 / 8 / 10 / 50 / 100 / 1000
Table A-32 Boot Device Priority Submenu
Boot Priority 1 Diskette Drive / <other>
Boot Priority 2 Removable Devices / <other>
Boot Priority 3 Hard Drive / <other>
Boot Priority 4 I2O Block Storage Device / <other>
Boot Priority 5 ATAPI CD-ROM Drive / <other>
Boot Priority 6 Any SCSI CD-ROM Drive / <other>
Table A-33 Hard Drive Submenu
Drive 1
Other Bootable Cards
Additional Entries