Specifications
Table Of Contents
- SGI™ 1400 Server Family Maintenance and Upgrades Guide
- List of Figures
- List of Tables
- About This Guide
- Working Inside the System
- Tools and Supplies Needed
- Safety: Before You Remove the Access Cover
- Warnings and Cautions
- Removing the System Access Cover
- Installing the Access Cover
- Working in the Subchassis and Electronics Bay
- Installing PCI Boards
- Removing a PCI option Board
- Removing the Front Panel Board
- Installing the Front Panel Board
- Removing the Diskette Drive
- Installing the Diskette Drive
- Peripheral Drives
- System Fans
- The Power Share Board
- Upgrading Baseboard Components
- SGI 1400 Server SCSI Backplane Installation
- Technical Reference
- Baseboard Connectors
- Main Power Connector
- Auxiliary Power
- Diskette Drive
- Front Panel Connector
- The SMM Connector
- The IPMB Connector
- VGA Video Port Connector
- Keyboard and Mouse
- Parallel Port
- Serial Ports A and B
- Universal Serial Bus
- Narrow SCSI Connector
- Wide SCSI Connector
- Internal IDE Connector
- The Hard Drive LED Connector
- ISA Connector Pinouts
- The PCI Connectors
- Baseboard Jumpers
- System I/O Addresses
- Memory Map Address Range
- Interrupts
- Video Modes
- Baseboard Connectors
- Equipment Log and Configuration Worksheets
- Environmental Specifications
- Chassis Warnings and Safety
- Index
132
Appendix A: Equipment Log and Configuration Worksheets
Table A-25 I/O Device Configuration Submenu
Serial Port A Disabled / Enabled / Auto / OS Controlled
Base I/O Address 3F8h / 2F8h / 3E8h / 2E8h
Interrupt 4 / 3
Serial Port B Disabled / Enabled / Auto / OS Controlled
Mode Normal / IrDA/ ASK-IR
Base I/O Address 3F8h / 2F8h / 3E8h / 2E8h
Interrupt 4 / 3
Parallel Port Disabled / Enabled / Auto / OS Controlled
Mode Output only / Bidirectional / EPP / ECP
Base I/O Address 378 / 278
Interrupt 5 / 7
DMA channel 1 / 3
Floppy disk controller Disabled / Enabled
Base I/O Address Primary / Secondary
PS/2 Mouse Disabled / Enabled