Specifications
Table Of Contents
- SGI™ 1400 Server Family Maintenance and Upgrades Guide
- List of Figures
- List of Tables
- About This Guide
- Working Inside the System
- Tools and Supplies Needed
- Safety: Before You Remove the Access Cover
- Warnings and Cautions
- Removing the System Access Cover
- Installing the Access Cover
- Working in the Subchassis and Electronics Bay
- Installing PCI Boards
- Removing a PCI option Board
- Removing the Front Panel Board
- Installing the Front Panel Board
- Removing the Diskette Drive
- Installing the Diskette Drive
- Peripheral Drives
- System Fans
- The Power Share Board
- Upgrading Baseboard Components
- SGI 1400 Server SCSI Backplane Installation
- Technical Reference
- Baseboard Connectors
- Main Power Connector
- Auxiliary Power
- Diskette Drive
- Front Panel Connector
- The SMM Connector
- The IPMB Connector
- VGA Video Port Connector
- Keyboard and Mouse
- Parallel Port
- Serial Ports A and B
- Universal Serial Bus
- Narrow SCSI Connector
- Wide SCSI Connector
- Internal IDE Connector
- The Hard Drive LED Connector
- ISA Connector Pinouts
- The PCI Connectors
- Baseboard Jumpers
- System I/O Addresses
- Memory Map Address Range
- Interrupts
- Video Modes
- Baseboard Connectors
- Equipment Log and Configuration Worksheets
- Environmental Specifications
- Chassis Warnings and Safety
- Index
130
Appendix A: Equipment Log and Configuration Worksheets
Hard Disk Pre-delay Disabled / 3 / 6 / 9 / 12 / 15 / 21 / 30
Language English
Spanish
Italian
French
German
Table A-20 Primary Master and Slave Submenu
Type Auto / None / CD-ROM / IDE Removable
ATAPI Removable / User
Cylinders
Heads
Sectors
Maximum Capacity
Multi-Sector Transfer Disabled / 2 / 4 / 8 / 16
LBA Mode Control Disabled / Enabled
32 Bit I/O Disabled / Enabled
Transfer Mode Standard / Fast PIO 1 / Fast PIO 2 / Fast PIO 3
Fast PIO 4
Ultra DMA Disabled / Enabled
Table A-21 Keyboard Features Submenu
Num Lock Auto / On / Off
Key Click Disabled / Enabled
Keyboard auto-repeat rate 30 / 26.7 / 21.8 / 18.5 / 13.3 / 10 / 6 / 2
Keyboard auto-repeat delay 0.25/ 0.5/ 0.75/ 1
Table A-19 (continued) Main Menu