Specifications
Table Of Contents
- SGI™ 1400 Server Family Maintenance and Upgrades Guide
- List of Figures
- List of Tables
- About This Guide
- Working Inside the System
- Tools and Supplies Needed
- Safety: Before You Remove the Access Cover
- Warnings and Cautions
- Removing the System Access Cover
- Installing the Access Cover
- Working in the Subchassis and Electronics Bay
- Installing PCI Boards
- Removing a PCI option Board
- Removing the Front Panel Board
- Installing the Front Panel Board
- Removing the Diskette Drive
- Installing the Diskette Drive
- Peripheral Drives
- System Fans
- The Power Share Board
- Upgrading Baseboard Components
- SGI 1400 Server SCSI Backplane Installation
- Technical Reference
- Baseboard Connectors
- Main Power Connector
- Auxiliary Power
- Diskette Drive
- Front Panel Connector
- The SMM Connector
- The IPMB Connector
- VGA Video Port Connector
- Keyboard and Mouse
- Parallel Port
- Serial Ports A and B
- Universal Serial Bus
- Narrow SCSI Connector
- Wide SCSI Connector
- Internal IDE Connector
- The Hard Drive LED Connector
- ISA Connector Pinouts
- The PCI Connectors
- Baseboard Jumpers
- System I/O Addresses
- Memory Map Address Range
- Interrupts
- Video Modes
- Baseboard Connectors
- Equipment Log and Configuration Worksheets
- Environmental Specifications
- Chassis Warnings and Safety
- Index
System Setup Utility (SSU) Worksheets
127
Table A-12 Multiboot Group
Boot Device Priority Diskette Drive
Removable Devices
Hard Drive
ATAPI CD-ROM Drive
Diagnostic Boot
Table A-13 Keyboard and Mouse Subsystem Group
Typematic Delay 250 ms delay / 500 ms delay
750 ms delay / 1000 ms delay
Typematic Speed 30 CPS / (other)
Mouse Control option Mouse Enabled / Disabled
Table A-14 Console Redirection
COM Port for Redirection Port 3F8/IRQ4 / Port 2F8/IRQ3
Port 3E8h/IRQ 3 / Disable
Serial Port baud rate 9600 / 19.2k / 38.4k / 115.2k
Hardware Flow Control None / CTS/RTS / CTS/RTS + CD / Xoff/Xon
Terminal Type PC - ANSI / VT 100