User`s guide

72
Chapter 3: Configuration Software and Utilities
ThethreeEMPaccessmodesaredisabled,pre-boot,and alwaysactive.SeeTable 3-24 for
a listing of the access modes.
Table 3-25 lists the access modes when the server is not configured for console
redirection.
Table 3-24 EMP Console Access Modes (Server Configured for Console Redirect)
Mode Server is powered off During POST After OS boots
Disabled Redirect window appears, but is
blank
Redirect window Redirect window
Pre-boot EMP commands available Redirect window
a
a. Note that you can modify the operation mode by selections in the POST reset and POST power-up dialogs.
These are server control dialogs available with the EMP Console.
Redirect window
Always
Active
EMP commands available Redirect window
a
EMP commands
available
Table 3-25 EMP Console Access Modes (Server Not Configured for Console Redirect)
Mode Server is powered off During POST After OS boots
Disabled Redirect window appears, but is
blank
Redirect window
appears, but is blank
Redirect window
appears, but is blank
Pre-boot EMP commands available EMP commands
available
Redirect window
appears, but is blank
Always
Active
EMP commands available EMP commands
available
EMP commands
available