User`s guide

Using the System Setup Utility (SSU)

Security Options

In the security options window, you can set the other security options:

• Hot Key—sets akey sequencethat puts theserver intosecuremode when thekey is

pressed.

• Lock-Out Timer—sets an interval that puts the server into secure mode when no

activity occurs during the interval.

• Secure Boot Mode—forces the server to boot directly into secure mode.

• Video Blanking—turns off the video when the server is in secure mode.

• Floppy Write—controls access to the diskette drive when the server is in secure

mode.

• Reset/Power Switch Locking—controls the power and reset buttons when the

server is in secure mode.

System Event Log (SEL) Viewer Add-in

Clicking on the SEL add-in task brings up the SEL viewer add-in, which allows users to:

• Examine SEL records via the BMC in hex or verbose mode

• Examine SEL records by sensor or event type in hex or verbose mode

• Examine SEL records from a previously stored binary ﬁle in hex or verbose mode

• Save SEL records to a ﬁle in either text or binary form

• Clear SEL entries from the non-volatile storage area

The SEL viewer’s main window provides access to features of the add-in. Each option

included on the main menu supports an accelerator key. Accelerator keys are indicated

by an underlinedletter in thetext listing theoption. The main windowincludes support

to display the following information for each SEL entry: record identiﬁer, event type,

time stamp information, generator identiﬁer, emv revision, sensor type, sensor number,

and event description.