User`s guide

60
Chapter 3: Configuration Software and Utilities
3. To edit a board, click Load to retrieve the board information. After making changes,
click Save.
4. To create a board, click New.
5. To remove a current definition of a board, click Delete.
Adding and Removing ISA Boards
Adding and removing boards through the RCA provides a way for the RCA to run its
conflictdetection algorithms onthe resources requestedby the boards.Thisalerts you to
any possible problems with that particular board in the current configuration.
To add an ISA board:
1. Click Add ISA Board in the RCA window.
2. Specify the directory for the .CFG file.
3. Select the file and click OK.
To remove an ISA board:
1. Select a valid ISA board in the Devices section of the RCA window.
2. Click on Remove ISA Board.
Modifying Resources
Modifyingtheresourcesofadevice may be necessary toaccommodatecertainoperating
systemapplications, and drivers.It may alsobe necessaryto modify resourcesto resolve
a conflict.
To modify the resources associated with a device:
1. Highlight the device in the Devices section of the RCA window.
2. Press the spacebar or Enter, or double-click on the entry.
This displays the functions of the selected device along with possible choices and
the resources associated with those choices.