User`s guide

Setup Menus
49
Console Redirection Submenu
Table 3-16 describes the feature choices under the console redirection submenu.
Boot Menu
You can make the following menu and submenu selections on the boot menu itself (see
Table 3-17 and the following subsections).
Table 3-16 Console Redirection Submenu
Feature Choices Description
COM Port
Address
Disabled
3F8
2F8
3E8
When enabled, console redirection uses the I/O port specified.
When disabled, console redirection is completely disabled.
IRQ # None, 3, or 4 When console redirection is enabled, this displays the IRQ
assignedpertheaddresschosenintheCOMPortAddressfield.
Baud Rate 9600
19.2k
38.4k
115.2k
When console redirection is enabled, use the baud rate
specified.
WhentheEmergencyManagementPort(EMP)sharestheCOM
portasconsole redirection,thebaud ratemustbe setto19.2k to
match EMP baud rate, unless the autobaud feature is used.
Flow Control No flow control
CTS/RTS
XON/XOFF
CTS/RTS + CD
None disallows flow control.
CTS/RTS is hardware flow control.
XON/XOFF is software flow control.
CTS/RTS +CD is hardware plus carrier-detect flow control.
Table 3-17 Boot Menu
Feature Choices Description
Floppy Check Disabled
Enabled
If Enabled, system verifies diskette type on boot.
Disabled results in a faster boot.
Multi-boot Support Disabled
Enabled
Enable this option only if the total number of hard
drives is less than eight.
Boot Device Priority N/A Enters submenu.