User`s guide

Installing Video Drivers

9. Once the operationalcode hasbeen updatedand veriﬁed,press any keyto continue.

Then press Esc to exit the program.

10. Shut the system down and remove any diskettes in the system.

11. Disconnect all AC power cords from the system and wait 60 seconds.

12. Reconnect the AC power cords and power up the system.

Installing Video Drivers

After conﬁguring the system, you need to install video drivers to take full advantage of

the features of the onboard CL-GD5480 super VGA video controller.

• The NT conﬁguration software CD includes video drivers for use with DOS and

Windows NT. Check the README.TXT ﬁle on the CD for information on installing

these drivers.

• For other operating systems, see your OS instructions for installing device drivers.

Using the Symbios SCSI Utility for NT

The Symbios SCSI utility detects the SCSI host adapters on the system board. Use the

utility to:

• Change default values

• Check and/or change SCSI device settings that may conﬂict with those of other

devices in the server

Running the SCSI Utility

When this message appears on the video monitor:

Press Ctrl-C to run SCSI Utility...

Press Ctrl+C to run the utility. When it appears, choose the host adapter that you want

to conﬁgure.