User`s guide

Emergency Management Port (EMP) Console
87
How You Use the FRUSDR Load Utility
The utility:
• Is compatible with ROM-DOS Ver. 6.22, MS-DOS Ver. 6.22, and later versions
• Accepts CFG, SDR, and FRU load files (the executable file for the utility is
frusdr.exe)
• Requires the following supporting files
– one or more .fru files describing the system’s field replaceable units
–a.cfg file describing the system configuration
–an.sdr file describing the sensors in the system
FRUSDR Command Line Format
The basic command line format is
frusdr [-?] [-h] [-d {dmi, fru, sdr}] [-cfg filename.cfg] [-fru filename.fru]
Table 3-26 lists the FRUSDR commands and describes them.
Table 3-26 FRUSDR Command Line Format
Command Description
frusdr Is the name of the utility
-? or -h Displays usage information
-d {dmi, fru, sdr} Displays requested area only
-cfg filename.cfg Uses custom CFG file
-p Pause between blocks of data
-v Verbose, display any additional details