Specifications

SMARTUNER MANUAL 9
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
© Nov2000 SGC, Inc. P.O. Box 3526, 98009 Fax: [phone] Tel: [phone]
E-Mail: [e-mail] Web Site: www.sgcworld.com
recommend 70 watts at 1700 kHz and 50 watts at
1600 kHz on a continuous basis.
Power Input Range: 3 to 200 watts (PEP)
Input Impedance Range: 45 to 55 ohms
VSWR: (Typical) Typically less than 1.4:1
DC Input Requirement: +13.8 VDC
DC Operating Range +10.5 to 15 VDC
Input Current: Average: .9 amps
Random set time: Typical: less than 2 seconds
Recurrent set time: Typical: less than 10 milliseconds
Non volatile memory address: 170
Antenna Length: Minimum length of 8 ft. —3.5 to 30 MHz
Minimum length of 23 ft. —1.8 to 30 MHz
Installation: Any position
Operating Temperature: -35° to +70°C
Size: 16 x 12 x 3 inches
Weight: 8 pounds (3.5 kilos)
Case Construction: Plastic ABS weatherproof case
Control Cable: SGC special cable, 9 feet coaxial and two power
Input wires (plus remote tune LED wire replaceable
by any standard cable)
2.1 Accessories
Shock Mounting Tray. SGC Part Number 54-50
+24 VDC Power option. SGC Part Number 54-52
25-foot extension cable. SGC Part Number 54-61
50-foot extension cable. SGC Part number 55-62
2.2 Recommended Antennas
SG-105 Marine and Base station antenna. This is a
60 foot end fed long wire type antenna. SGC Part
Number 55-10.
SG-107 Delta Loop Antenna. This is a delta loop 11
meters high by 11 meters wide at the base. SGC Part
Number 55-12.
SG-203 Marine 28 foot whip antenna. This antenna
is used for most powerboat installations. SGC Part
Number 55-24.
SG-303 High performance 9-foot whip antenna.
This dual element antenna is designed for severe