Specifications

PO Box 3526, Bellevue, WA. 98009 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
© 2003 SGC Inc. 56
2:1
This LED will light when the VSWR is greater than 2:1. It will go
out when VSWR is less than 2:1.
PHZ
This LED indicates the status of the antenna reactance. When lit,
reactance is inductive. When off, reactance is capacitive.
FWD
This LED indicates the presence or lack of RF power from the
radio. When transmitting, the LED will light to indicate RF
detected. The LED should be dark when receiving.
OTHER
All LEDs will blink on and off at a rate of 2Hz to indicate the tuner
was not able to find a valid match.
Note that these status LEDs are usually used to aid a technician in
diagnosing the status of the antenna system and should not be
thought of as laboratory instruments. As the Smartuner tunes, the
BITE status will be continually updated from the CPU.