User manual

© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
2
1.0 Supplied Items
DC Power cable with 2.1 mm connector one end
Audio cable
Serial extension cable RS-232 9 conductor M-F
DIN 8 pin Plug with cable attached
Procomm 2.0 for DOS shareware communications software
GUI (Graphical User Interface) V1.66 for Windows Operating System
2.0 Installation Procedure
Connect RADIO 1 or RADIO 2 Port of the Modem to your radio using 8 Pin
connector (cable supplied). Connect 9 pin straight through cable supplied to
HOST COMPUTER connector and a PC comm port. For DOS mode use sup-
plied Procomm software or another communication software package and set it
to 9600 Baud 8 data bits 1 stop bit and no Parity. For Windows mode use GUI
(Graphical User Interface) software supplied, see Control Program Users
Guide section of this manual. No software or hardware protocol supported
with this revision of firmware
2.1 Installation Procedure for SG-2000