User manual

7.0 Command Set for SG-7200 (TOR Module CIRR 476/625)
56
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
CMD Host Value Description
Command OpCode Range
SAB AU text string sets the answer back string. This may be empty
if the answerback needs to be disabled.
SAR AC selcal Format <SOH>ACselcal<ETB>. Selcal may
be 4,5 or 9 characters with optional identifier.
See SEL for selcal format options.
SBK issues the ARQ “break-in” or “re-sync” when
in ARQ listen.
SBY S2 na enters standby mode where TNC waits for
FEC, SELFEC, or ARQ calls.
SCW CW text string sets the CW-id. May be empty if the CW-id is
disabled.
SDI S5 0...5 sets the allowable signal distortion level.
Progressive levels above zero (up to 5) will
tighten the margin on when the limits of accept
able distortion will be reached and RQ's
will be issued.
SDY AD ?? sets the transmitter turn-on delay. This factor is
multiplied by 8.3 ms
SEC na na sets the "lcflg" to allows or not disable locally-
generated echo.
SED S0 na returns to a state where low-level CCIR-625
waits command input. In this state it will not
respond to FEC or ARQ - it is in the "dead", or
"waiting commands" state.