User manual

default for this parameter is 5.
15.4.7 AMTOR Tx Delay
This parameter sets the link timing for AMTOR operations. Under
normal operation a Tx Delay of 30 to 40 is used. If the two sta-
tions are very close to one another a larger value may be required.
The default for this parameter is 30 ms.
15.4.8 AAB Text
The AAB Text parameter is the text that is sent upon receipt of the
CTRL-E character in AMTOR operation. This text is set only if
the AAB WRU Text Flag is set to On. The default for this para-
meter is DE plus the SELCAL defined in the Station Information
menu.
16.0 View Menu
The View menu controls the state of the various status indicators and control
windows that are present in the program. This gives the user full control over
displaying the MiniLog, Toolbar and other items.
16.1 Toolbar
This menu option controls the status of the program toolbar. This is nor-
mally checked.
This parameter is not saved and will revert to the default setting on each
program start.
16.2 Status Bar
This option controls the status line that is at the bottom of the program
window. This status line gives information on the current menu selec-
tion, time in Local and UTC time and the current frequency if transceiv-
er control is selected.
16.3 TNC Status
This option controls the TNC status bar at the bottom of the TNC win-
dow. This status line gives indications of the current mode, current
speed and current link status.
16.4 MiniLog
This menu option controls the status of the status line at the top of the
TNC window. This gives the current stations callsign, name and loca-
tion as well as the last time, date and operating mode of any previous
contacts.
46
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com