User manual
(CMD:) prompt. This may also be used to switch back to Host Mode.
This option may also be invoked by pressing ALT-F8.
14.4 Callbook Search
This menu option allows the user to search for a callsign from an exter-
nal callsign server. Any data that is found will be displayed in a popup
dialog box. The data that is displayed is variable based on the exact
callsign server that is being used.
If you wish to copy this data, simply highlight the data with the mouse
and press CTRL-INSERT. This will copy the data to the clipboard.
15.0 TNC Menu
15.1 Enter Command
This menu option allows the user to directly enter TNC command to the
controller. This may also be accessed by pressing the F11 key. This
option will not normally be used as all parameter settings can be
accessed via the Gain or Parameters dialog boxes that are also located in
the TNC menu.
15.2 Switch Ports F4
This menu command allows the user to select either port 1 or port 2 on
the SG-7200 DSP SmartModem. The program will save this informa-
tion and will select the last port used on the next program start. The cur-
rent port is always displayed at the top of the display window. It is also
possible to select this command by pressing the F4 key.
15.3 Set Port Gains F6
This dialog box consists of two controls to set the gain parameters of the
SG-7200. These parameters are loaded at the startup of the program.
15.3.1 Input Gain
This control is activated by pressing the Up and Down arrows next
to the parameter. This will control the level of the input gain to the
SG-7200. The larger the value the lower the audio input signal
that is required for the for the SG-7200. The nominal values for
this control is 4. This value is loaded each time the program is
started or at any time the value is changed.
15.3.2 Output Attenuator
This control sets the output level from the SG-7200 to the radio.
The lower the value the higher the output level that is supplied to
the audio input of the transmitter. The nominal value for this com-
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: sgc@sgcworld.com Web site: http://www.sgcworld.com
44