User manual

This option requires the installation of a sound card. The CW feature
uses the internal PC speaker.
12.0 TOR Modes
12.1 AMTOR Listen
This menu option place the TNC into AMTOR mode with FEC and
ARQ listen enabled. This allows the user to monitor other AMTOR sta-
tions sending FEC or linked ARQ communications.
12.2 AMTOR Standby
This option select AMTOR mode with all monitoring options disabled.
This allows the station to monitor a frequency without filling the receive
buffer with monitored traffic.
12.3 SITOR
This menu option places the TNC into SITOR mode. All monitoring is
disabled in SITOR mode.
13.0 Baudot Menu Option
This menu option has the setting for the ASCII and Baudot mode of operation.
Each menu option selects the displayed mode and operating speed.
To switch to Baudot mode (normal amateur operation) press the ALT-B key.
The user may also change the speed while in receive mode by pressing the “+”
or “-” buttons that are located on the toolbar.
14.0 Misc Menu
14.1 Logbook
The logbook option allows the user to display a list of log entries for the
current station entered in the F2 callsign box.
Entries may be deleted or edited as desired.
Up to 100 entries are displayed. If you wish to scroll through the entire
log book. Select the Update entry option and use the Up and Down
arrows in the box. This will allow you to move to any entry in the log
book.
14.2 Search Logbook
This option allows you to search the contents of the logbook and dis-
play the results without effecting the current logbook (F3) contents.
Entries may be edited or deleted as required.
14.3 Command Mode
This option allows the user to switch the TNC into command mode
43
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com