User manual

the week (00 - 53)
~Xx Date
~XX Time
~Xy Two-digit year without century (00 to 99)
~XY Year with century
~XZ Time zone name, or no characters if no time zone
5.8 Miscellaneous Macros
These macros give the user additional program and controller operation.
All macros are available in insertion and typeover modes unless other-
wise specified.
~r Appends a carriage return at the current position in the line.
This macro is only available in insertion mode.
~f Prints the current frequency from the logbook. If a transceiver
interface is being used the data will be retrieved automatically
from the interface.
~m Prints the current operating mode.
~qs Prints the current log entry number. This is based on the file size
and can not be modified by the user.
~~ This is the escape sequence. If you need to imbed the macro inser
tion character ‘~’ into the text stream. Add it as ~~ to the file.
6.0 Special Keys
This section of help describes the special function keys that are available when
using the program with the SG-7200 controller. You can access the special key
screens from within the program at any time by pressing ALT-Z.
6.1 Function Keys
F1 Access On-Line Help
F2 Enter Callsign/Selcal of the other station.
F3 Display the built in logbook in the program.
F4 Switch TNC from Port 1 to Port 2 or vice versa
F5 Call CQ in the current mode of operation.
F6 Display Port Gain Setting Dialog Box
F7 Display TNC Parameters Dialog Box.
F8 Display File Transfer Status Window
F9 Display Transceiver Control Panel (this option is only available
if an external Transceiver control has been selected during pro
gram setup).
F10 Not Used
F11 Enter TNC command. Allows the user to manually enter a
TNC command
31
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com