User manual

~OE - End current ARQ link or QSO after all data is sent.
Send no additional data to TNC.
~OR - Sets TNC to Receive Mode after all data has been sent
Send no additional data to TNC.
~OT - Sets TNC to Transmit Mode
5.6 Time and Date Macros
The time and date macros are used to insert the current time and date in
various formats. Both local and universal times are supported through
the macros. These macros are supported in both insertion and typeover
modes. Insertion mode is shown in the text
~tu Prints the current UTC time.
~tl Prints the current local time.
~du Prints the current UTC date.
~dl Prints the current Local date.
5.7 Extended Time and Date Macros
The extended time and date macros can be used by the user to get even
more control over the formatting of times and dates. These macros will
work in either insertion or typeover mode.
You may also select either Local or UTC time by changing the first
character in the macro.
For UTC use an upper case ‘X’ or Local time use a lower case ‘x’. All
macros below are shown using UTC format using the insertion (~) pre-
fix..
~Xa Abbreviated weekday name
~XA Full weekday name
~Xb Abbreviated month name
~XB Full month name
~Xc Date and time
~Xd Two-digit day of month (01 - 31)
~XH Two-digit hour (00 - 23)
~XI Two-digit hour (01 - 12)
~Xj Three-digit day of year (001 - 366)
~Xm Two-digit month as a decimal number (1 - 12)
~XM 2-digit minute (00 - 59)
~Xp AM or PM
~XS Two-digit second (00 - 59)
~XU Two-digit week number where Sunday is the first day of the
week (00 - 53)
~Xw Weekday where 0 is Sunday (0 - 6)
~XW Two-digit week number where Monday is the first day of week
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
30