User manual

Auto CQ. This tool controls the Automatic CQ feature for the program.
This button acts like a toggle. The first click enables the CQ feature; the
second click disables the CQ feature. This control has the same functional
ity as the F5 key.
QRT (End QSO). This tool is used to end the current link. It has the same
functionality as pressing the END key.
ID Control. This tool is used to send the identification text that is defined
for the current operating mode. See Operating Parameter section for more
information on defining this text. This tool has the same functionality as
pressing ALT-I.
Transmit Control. Pressing this tool will place the SmartModem into
Transmit Mode. This has the same functionality as pressing the Page Up
key.
Clear Transmit Buffer. Pressing this control will clear the current TNC
transmit buffer. This has the same effect as pressing the DELETE key.
Receive Control. Pressing this control will place the TNC into receive
mode if the current mode is ASCII or Baudot. If the mode is AMTOR it
will issue a changeover request to the transmitting station. This control has
the same effect as pressing the Page Down key.
Clear Receive Buffer. Pressing this control will clear the contents of the
receive window and buffer.
Set Transmit Polarity. This control sets the current transmit polarity. If the
control is “right” reading the transmit invert option is turned off. If the
control is displayed “upside-down” the transmit invert option is set to on.
Set Receive Polarity. This control sets the current receive polarity. If the
control is “right” reading the receive invert option is turned off. If the con
trol is displayed “upside-down” the receive invert option is set to on.
Increase Transmit Speed. This control will increase the transmit speed in
ASCII and Baudot modes. This control has no effect in AMTOR.
Decrease Transmit Speed. This control will decrease the transmit speed in
ASCII and Baudot modes. This control has no effect in AMTOR.
Letters/Figures State. This control sets the Letters/Figures state for the
TNC. This is active in AMTOR, ASCII and Baudot.
Cut. This key cuts the current highlighted section.
Copy. Copies the current highlighted section to the clipboard.
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
26