User manual

25
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
2.8 Receiving Graphic Files
This program supports graphic files in BMP, JPG, PNG or PCX format
in PACTOR Mode. It is required for the user to have an external graph-
ics viewing program like LView, Paintshop Pro or other graphics editor
that accept command line arguments.
For digital use, JPEG format pictures saved with a JPEG quality of 50 to
70 work well. Note that using a higher quality level results in a consid-
erable larger file, which may be difficult to transmit.
To setup the graphics viewer, use the following steps.
1. Go to Setup Menu.
2. Go to Operating Parameters
3. Select the "Graphics" tab
4. Click on "Select Viewer"
5. Using the File Selector, find the file of the viewer that you wish to
use and select ok.
The program will now call your viewer whenever a recognized graphic
format is received during a binary file transfer. You may also use the
View Graphic option in the file menu to view a file through the external
viewer.
2.9 Accessing the Transceiver Control
To access the transceiver control panel, press F9. This is used to toggle
the control panel on and off of the screen.
2.10 Accessing the File Status Window
The file status window is used to display the current status of the files
that are being sent. Use F8 to access this screen. F8 will also deactivate
the window.
3.0 Program Toolbar
The toolbar allows quick and simple access to the most frequently used pro-
gram controls. This section gives a quick overview of the toolbar controls.
Transmit file. See Transmit File in the File Handling Section.
File Queue. See File Queues in the File Handling section.
Transmit Filtered File. See Transmit Filtered File in File Handling section.
Open Receive File. See Receive File in File Handling Section