User manual

1.4 Uninstalling the Software
If necessary to un-install the software, use the Uninstall prompt in the
SG-7200 program group. This will remove all program files from the
system.
1.5 Starting the software
To start the software turn on the modem and wait for it to initialize then
select the SG-7200 DSP SmartModem entry in the SGC program group.
2.0 Getting Started
Below are outlined the most common first time questions from users. This
should give the user a quick start on the basic program options and keystrokes.
2.1 Accessing the Log Book
Press F3 to toggle the Logging window for the current port.
2.2 Calling CQ
In most modes calling CQ is the normal method of establishing a QSO
with another station. To call CQ, press F5 or click on the CQ button on
the Tool Bar.
To stop the CQ, press the F5 a second time. The CQ will be aborted
after the current text clears the transmit buffer.
2.3 Clearing the Transmit Buffer
To clear the transmit buffer, press the DELETE key.
2.4 Dropping a Link
Forced Drop (ARQ Modes)
To force drop a link or link attempt, press the HOME key.
2.5 Drop ARQ Link (Normal Disconnect)
To drop or disconnect the current link, press either ALT-D or SHIFT-
ALT-D or use the QRT button on the toolbar.
2.6 Sending a Simple Identification
Press ALT-I to send the user defined identification text for the current
mode.
2.7 Linking to Another Station (ARQ)
To link to another station Press ALT-C, enter the Selcal or Callsign for
PACTOR Mode of the other station and press Enter. This will start the
link.
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
24