User manual

7.2 Displaying the Current Setup
Once the NEWTOR program displays it’s prompt, display the current
setup using the “DIS” command an example of a setup is illustrated
below.
This display shows radio port 1 is in use, audio input level is set for 6dB
gain and output level is set for 0dB attenuation. Also shown, AMTOR
mode is in effect, and the status and settings for a number of operational
parameters. Some of these, for example, tx-delay controls basic behavior
of the radio interface, while others like the MYCALL or the answer
back fields, contain customized or personalized messages. There also
are a number of control flags such as “diddle” and “unshift-on-space”
that further customizes the user’s working environment.
The three-letter acronym printed next to these displayed fields is the
appropriate command that may be used to change the field’s setting. The
full command set is printed in the appendix.
Suggestions for a minimum configuration are described next.
10
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
Date/Time = Mon Sep 26 00:06:27 1988
Radio Port =1, Input Gain =4, Output Atten =0
MYSELCALL=SSGC SELCALL=SSGC
AMTOR PERIOD=536870912
SITOR PERIOD=447392427
Operating mode=0
TOR status 176
AMTOR mode
Answerback string ... (AAB)=QRA DE SGC
BAUDOT bit rate ..... (RBA)=45
ASCII bit rate ..... (RAS)=110
AMTOR Tx delay ...... (ADE)=30 ms
AMTOR Cd delay ...... (ACD)=5 ms
Display width ....... (ACR)=80 chars
Answerback status ... (AAS)=1
Auto Line Feed status (ALF)=1
Enable FEC .......... (RFE)=1
Receive Reversed ... (RXR)=0
Transmit Reversed ... (TXR)=0
Unshift On Space ... (USO)=0
RTTY diddle ......... (DID)=1
Filter output Mute .. (MAU)=0
Modem Subfunction ... (MSF)=0