User manual

•Configure the unit according to the radio mode you plan to use.
Figure 1 Screen at Boot-up
This above display is the default and is controlled by the contents of the
resident AUTOEXEC.BAT file in Flash ROM. The “CMD:” prompt
indicates that the NEWTOR program is ready to accept commands. This
program controls the Baudot, ASCII, SITOR and AMTOR modes. It is
also possible to download other SG-7200 programs from a remote host
via the serial port.
The following discussion further explores the NEWTOR program.
9
© 1999 SGC Inc
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
A:\>REM *****SGC DATA MODEM Version 1.00 February 1997*****
A:\>a:NEWTOR.exe
***SG-7200 SMARTMODEM (C) SGC, INC 1997 [V1.2]***
CMD: