Data Sheet

SGW111X BLE Modules Series Datasheet
Page 2 of 25
1. Introduction
The SGW111X series of pre-certified multiprotocol SoM enables Bluetooth 5.0/Bluetooth Low
Energy (BLE) connectivity for portable and extremely low power embedded systems. Powered by
Nordic’s nRF52840 Bluetooth® 5/BLE SoC, the SGW111X BLE Module can be easily applicable to
popular development platforms to facilitate the building of smart devices fast at optimized cost.
The highly flexible, ultra-low power SGW111X BLE Module features a small form factor of 10.2mm
x 14.1mm x 1.9mm, and 128-bit AES hardware encryption which ensures best-in-class security for
data transmission. This advanced BLE module series greatly facilitates IoT applications including
connected home, smart industry, smart transport and logistics, etc.
2. Features
o Complete RF solution with integrated antenna or u.FL connector as external antenna
o Bluetooth 5 ready multi-protocol module:
• 2Mbps
• Long Range
• Advertising Extension support
o Wireless System-on-Chip - Nordic nRF52840:
• 32Mbit ARM CortexTM – M4F CPU @64MHz
• 1MB Flash program memory
• 256kB RAM data memory
o Wide selection of MCU Peripherals:
• Full-speed USB (12Mbps)
• Four SPI Master/Slave (8Mbps)
• Two 2-wire Master/Slave (I2C compatible)
• Two UARTs (with CTS/RTS)
• NFC Tag-A interface
• 20 channel CPU independent
• Programmable Peripheral Interconnect (PPI)
• 5x32 bit, 3x24bit Real Timer Counters (RTC)
• 12Mbit/200K SPS ADC