Specifications

T-Link TL250
The T-Link TL250 is our next generation of
low-cost, high-performance network alarm
communicators that use the latest digital
networking technologies to provide secure Internet
communications between Power864
TM
or MAXSYS
®
control panels and Sur-Gard
TM
System lll central
station receivers. Programming the T-Link TL250 can
be accomplished locally using the control panel
keypad or T-Link Console software over the IP network
connection made directly to T-Link TL250’s Ethernet port.
By interfacing to T-Link TL250’s four on-board
programmable zone inputs, the unit can be configured
to operate as a stand-alone communicator for interfacing
existing third-party control equipment.
T-Link
The T-Link works within a proprietary LAN/WAN (Intranet)
to communicate alarm signals efficiently and
economically to a SG-DRL-IP central station receiver
line card, or to a PC utilizing the SG-Reporter IP software.
The T-Link connection is fully supervised when used in
conjunction with the SG-DRL-IP receiver line card.
T-Link
TM
Network Alarm Communicator
• Allows alarm event to be
transmitted over a proprietary
LAN/WAN (Intranet)
• Compatible with DSC Power864
and MAXSYS via built-in
PC-Link header
• Fully programmable with
DLS2002 and DLS2002SA System
Administrator software
SG-REPORTER
™
IP
Software for use with T-Link
Network Alarm Communicator* only
• Monitor up to 255 T-Link accounts
over a proprietary LAN/WAN
• Compatible with Windows
™
9x/NT
™
/2000 operating systems
• TCP/IP communication and
IP management software
• Searchable database,
detailed customer profiles
• All events are color-coded for
easy visual identification
* T-Link TL250 is not supported
T-Link
TM
TL250
Internet Alarm Communicator
• Supported by Power864 and
MAXSYS control panels via built-in
PC-Link, or stand-alone mode
• Works over local LAN/WAN
network or the Internet
• 128-bit AES encryption (NIST approved)
• Supports DHCP (dynamic IP addresses)
• Reports events to 2 different receiver
IP addresses
• Compatible with 10/100BaseT networks
• 4 on-board PGM zone inputs
(expandable to 12 using PC5108
zone expander module)
• 2 PGM voltage outputs
• Compatible with Concourse
TM
structured cabling system
• Fully programmable with
DLS2002SA software
• UL AA High Line Security and
ULC Level 5 listed
T-Link
™
TL250 and T-Link
™
Network Alarm Communicators
SOURCE BOOK
14