Installation manual

ManualsBrandsSG Security Communications ManualsMusical equipmentMLR2-E

• L01 indicates Line Card 01

• 1234 is the Account Code

• E indicates an opening

• 130 is the event code

• 01 indicates Group 01, 025 indicates Zone 25

Refer to "Communication protocol with central station computer".

Ademco Express Format

This format consists of 4-digit Account Codes and 1- or 2-

digit alarm codes. The DRL2A will decode the signal as

regular 4/1 or 4/2 format. Option [53] must be programmed

as “01” to decode the 4/1 Express format instead of the

Sur-Gard 4/3 with Checksum format.

Ademco Super Fast or High Speed Format

The High Speed format consists of 4 account numbers, 8

channel status digits, and 1 auxiliary channel.

NOTE:NOTE:

NOTE:

When option [5B] is programmed as "00", the DRL2A

will interpret the signal into 4/2 format. When option [5B] is

programmed as "01", the DRL2A will send the information

as it received to the printer and to the computer using High

Speed RS-232 communication protocol.

Channel Status Codes (Digits 5 though 12)Channel Status Codes (Digits 5 though 12)

Channel Status Codes (Digits 5 though 12)

CodeCode

Code

1 New event (previously unreported)

Printer: 1234-11 AlarmZn#01

Computer: 1234 A 01

2 New opening (previously unreported)

Printer: 1234-21 Open-Usr01

Computer: 1234 O 01

3 New restore (previously unreported)

Printer: 1234-31 RestrZn01

Computer: 1234 R 01

4 New closing (previously unreported)

Printer: 1234-41 CloseUsr01

Computer: 1234 C 01

5 Normal (no event since previously reported restore)

6 Previous reported event still in effect.

0 New trouble

Printer: 1234-D1 TrbleZn#01

Computer: 1234 T 01

For the ninth channel (digit 13), the following channel status

codes are used:

CodeCode

Code

1 Duress report and status report in the previous 8

channels (specifically channel 1)

Printer: 1234-00 Dures——

Computer: 1234 A 00

2 Opening report in the previous 8 channels (with user

ID in channel 1)

Printer: 1234-21 Open-Usr01

Computer: 1234 O 01

3 Zone Bypass/Unbypass status report in the previous

8 channels

Printer: 1234-11 BypasZn#01

Computer: 1234 B 01

Printer: 1234-31 UnBypZn#01

Computer: 1234 H 01

4 Closing report in the previous 8 channels (with user

ID in channel 1 if expanded reporting of user # is

selected at the communicator)

Printer: 1234-41 CloseUsr01

Computer: 1234 C 01

5 Zone trouble active/ trouble restore status report in

the previous 8 channels

Printer: 1234-B1 TrbleZn#01

Computer: 1234 T B1

Printer: 1234-B2 TrbleRst01

Computer: 1234 R B1

6 System trouble active/restore reports in the previous

8 channels

Printer: 1234-C1 AClstZn#01 or

1234-C1 AClstRst01

Computer: 1234 T C1

or 1234 R C1

Printer: 1234-C2 LowBtZn#02 or

1234-C2 LowBtRst02

Computer 1234 T C2 or 1234 R C2

Printer: 1234-C3 SysFlZn#03 or

1234-C3 SysFlRst03

Computer 1234 T C3 or 1234 R C3

Printer: 1234-C4 WDTimZn#04or

1234-C4 WDTimRst04

Computer 1234 T C4 or 1234 R C4

Printer: 1234-C5 StMsgZn#05 or

1234-C5 StMsgRst05

Computer 1234 T C5 or 1234 R C5

Printer: 1234-C6 TelcoZn#06 or

1234-C6 TelcoRst06

Computer 1234 T C6 or 1234 R C6

Printer: 1234-C8 SensoZn#08 or

1234-C8 SensoRst08

Computer: 1234 T C8 or 1234 R C8

NOTE: NOTE:

NOTE: Zone #07 is not used for code 6.

7 Zone alarm status report, alarms are reported in

previous 8 channels

8 New low battery (will not re-report on subsequent

calls and will not send restore).

Printer: 1234-80 LowBt——

Computer: 1234 T 80

9 Test report, alarm status is reported in the previous

8 channels

Printer: 1234-90 24HrsTest-

Computer: 1234 T 90

0 Radio diagnostics, radio testing info is reported in

previous 8 channels.

Printer: 1234-00 Radio——

Computer: 1234 T 00

FSK 200 Baud Format

The FSK 200baud format uses CCITT V.21 frequencies at

a speed of 200 Baud. In order to receive this format properly,

the CCITT modem chip on the DRL2A must be installed

instead of the Bell 103.

The DRL2A will print the received signals as follows:

L0X-AAAAA-0ZZ Audio

L0X-AAAAA-1ZZ Alarm

L0X-AAAAA-2ZZ Restore

L0X-AAAAA-3ZZ Status: Alarm

L0X-AAAAA-4ZZ Status: Normal

Where: X is the line number

AAAAA is the account number

ZZ is the zone munber