Specifications

SOURCE BOOK
Concourse
™
Structured Cabling Modules
HS-TH1600
Analog Bridged Telecom Module
• Connections for up to 4 incoming lines
on 110 IDC
• Up to 6 RJ45 outputs
• One RJ45 expansion port
(to connect to HS-TE1650)
• Line 1 or line 2 security system
connection via RJ31X
• Fits on HS-MP200 mounting
plate (included)
HS-TE1650
1x6 Analog Bridged Telecom
Expansion Module
• Expansion module for HS-TH1600
• One RJ45 4-line input jack
• Up to 6 RJ45 outputs
• One RJ45 expansion port
(to connect to another HS-TE1650)
• Fits on HS-MP200 mounting
plate (included)
HS-TH200
Analog Telephone Module
• Connections for up to 4
incoming lines
• Parallel outputs for up to
11 locations
• One RJ45 expansion port
(to connect to another
telephony module)
• Line 1 or line 2 security system
connection via RJ31X
• Fits on HS-MP200 mounting
plate (included)
58
STRUCTURED CABLING PRODUCTS
Concourse
™
Structured Cabling Solutions
CABINETS
Medium/Large/Extra-Large Cabinets
• Flush-mount or surface-mount
• Screw tabs allow for variable
stud spacing
• Built-in raceways with covers
• Provision for tamper switch
HS-CAB1400
• 14.25” wide x 14.25” high x 4” deep
(36 x 36 x 10 cm)
HS-CAB2800
• 14.25” wide x 28.5” high x 4” deep
(36 x 72 x 10 cm)
HS-CAB4200
• 14.25” wide x 42.75” high x 4” deep
(36 x 108 x 10 cm)
57
HS-DH800
Data/Voice Distribution Module
• 8 channel data/voice distribution
module
• Independent 110 IDC to RJ45 T568A
connections
• Can be used to interconnect
HS-NH400 or HS-NH8100
Ethernet modules for a Local Area
Network (LAN)
• Can be used to connect home-run
telephone outlets
• Fits on HS-MP200 mounting
plate (included)
HS-NH400
Ethernet Network Hub
• 4-port, 10BaseT IEEE 802.3
compliant Ethernet hub
• Interconnect up to 4 computer
peripherals up to 328’ from hub
• Fits on HS-MP200 mounting
plate (included)
HS-NH8100
8-Port 10/100 Switch
• 8-port, 10/100Mbps
Ethernet switch
• Used to uplink to another
switch, hub or repeater
• Auto-negotiation from any port
• Auto-sensing of speed
(10/100Mbps)
• Requires HS-HUB100-BRKT
mounting plate
DSC is committed to assisting our security dealers in taking
advantage of the tremendous growth opportunity available in
the structured cabling market. DSC believes that the intrusion
alarm system is the logical place to begin a home or small
business structured cable system. Concourse wiring
enclosures and their related low voltage modules have been
designed with alarm installers in mind, to provide seamless
integration of PowerSeries or MAXSYS control panels and
modules. Dealers have everything they need to offer a
complete low-voltage system.
MOUNTING
PLATES
HS-MP200
• 4 x 6” (10.2 x 15.4 cm)
HS-MP300
• 8 x 6” (20.5 x 15.4 cm)
HS-MP400
• 12 x 6” (30.7 x 15.4 cm)
HS-MOD001-BKT
• 4 x 6” (10.2 x 15.4 cm)
- required to mount HS-VM1100
HS-HUB100-BKT
• 8 x 6” (20.5 x 15.4 cm)
- required to mount NH8100
HS-BB100
• Battery mounting bracket (right side)
HS-BB101
• Battery mounting bracket (left side)
PowerSeries KITS
Control Panel with Concourse
Mounting Plate
• PC580HS
- 4 - 32 zone control panel
• PC1555HS
- 6 - 32 zone control panel
• PC5010HS
- 8 - 32 zone control panel
• PWR864HS
- 8 - 64 zone control panel (PC5020)
• Concourse also supports the
MAXSYS control panel and
all MAXSYS modules
Concourse 1/30/03 11:07 PM Page 4