Specifications
SOURCE BOOK
T-Rex
™
Request-To-Exit Detector
There is a substantial operational
difference between a common
infrared intrusion motion detector
and the T-Rex request-to-exit device.
Intrusion PIR detectors operate at
sensitivity levels that look for the
positive presence of a human being. Exit detectors must detect the extremely fast movement of a hand (the target)
about to push the door or turn the door handle.
Kantech's T-Rex utilizes proven infrared detection coupled with DSP (Digital Signal Processing) sampling
specifically designed for access control applications assuring catch but greatly reducing the possibility of false
“Door Forced Open” alarms.
While many exit detectors on the market offer adjustments of
the detection pattern with masking or horizontal alignment,
the T-Rex is the first detector to offer vertical detection
targeting using two adjustable louvers located in the detection
chamber. The installer can trim the detection area by
adjusting these louvers from 90° down to a minute 5°.
Horizontal adjustment is provided by rotation of the lens.
These two adjustments allow the installer to mount the
detector so that the detection area will not "hit" the floor along
the doorjamb. This exclusive feature defeats attempts to
circumvent door supervision by sliding objects
underneath the door.
Detector type Passive infrared
Filter technology Digital Signal Processing (DSP)
Detector lens Curtain type Fresnel lens
Detection range One hand: 10’ (3 m) / Whole body: 20’ (6 m)
Power consumption 12 to 28 VDC, 50 mA
Piezo buzzer 90 dB @ 28 VDC, 5 to 28 VDC, 20 mA (XL & XL2 only)
Main relay contacts SPDT, 1 A @ 30 VDC
Main relay timer Adjustable, 1/2 to 60 seconds
Main relay recycle time Fixed, 3/4 seconds off
Lock control relay Available on LT2 and XL2 models only, solid-state relay,
NC, 2 A @ 30 VDC timed @ 2 seconds fixed
Tamper switch NC, 100 mA max @ 30 VDC max
Color White (all models) Black (XL & XL2 models only)
Dimensions (H•W•D) 71/8 x 13/4 x 17/8” (19 x 4.5 x 4.75 cm)
LED Indicator Bi-color (red, green)
Certifications UL 294, FCC
AVAILABLE
ACCESSORIES
Models
T-REX-LT Tamper and timer
T-REX-XL Tamper, piezo and timer
T-REX-LT2 Tamper, timer and
2 relays
T-REX-XL2 Tamper, piezo, timer and
2 relays
TECHNICAL
SPECIFICATIONS
ACCESS CONTROL PRODUCTS
ioPass
™
Stand-Alone Door Controller
The ioPass is a fully programmable stand-alone access
control system that allows entry using proximity
technology, keypad or both, for up to 5,000 users. With
its compact and surface mount design, the ioPass is
programmed directly from the unit’s keypad. The system
is available in two models: with integrated or external
proximity reader.
AVAILABLE
ACCESSORIES
Models
SA-500 Stand-alone controller with
integrated proximity reader
SA-600 Stand-alone controller with
external proximity reader
SA-RM56 Additional relay module
Compatible Cards
P10SHL Standard ioProx
proximity card
P20DYE Thin ioProx proximity card,
front/back surface glossy
for Dye-Sub printing
P40KEY ioProx proximity keytag
FEATURES
ioPass Stand-Alone Door Controller
• Up to 5,000 card users
• Use reader, keypad or both
• Integrated or external ioProx proximity reader
• Read range of up to 4” (10 cm)
• Higher security provided by a concealed door
relay module
• Auxiliary relay to arm/disarm an alarm system
• Audit trail on the unit
• Duress function available
• 10 proximity keytags included
TECHNICAL
SPECIFICATIONS
Typical read range
(1)
Up to 4” (10 cm)
Input voltage 12 VDC
Current DC maximum 300 mA
Display 16 characters, 2 lines, LCD with backlight
Dimensions (H
•
W
•
D) 5.9 x 4.3 x 1.8” (15 x 11 x 4.5 cm)
Color Grey
Case material ABS (UL 94V-0)
LED indicator Bicolor (red,green)
Sounder Piezo
Operating temperature 32° F to 122° F (0° C to 50° C)
Operating humidity 5% to 95% RH
Maximum distance between:
Controller and proximity reader 500’ (150 m), 2 twisted pairs, solid
conductor #22AWG UNSHIELDED
Controller and relay module 500’ (150 m), 2 twisted pairs, solid
conductor #22AWG UNSHIELDED
Relay module and power supply 500’ (150 m), 1 pair, solid conductor
#18AWG UNSHIELDED
Recommended power supply 12 VDC, 1 A
Door contact input NO or NC selectable
Request-to-Exit input NO or NC selectable
Relay output Form C, NO and NC, 3 A, 24 VDC (Strike relay, Alarm relay, Relay-1)
Strike relay timer 1 to 255 sec.
Alarm relay timer 1 to 255 sec.
Relay-1 timer 1 to 255 sec.
Door ajar timer 1 to 255 sec.
Audit trail On unit, last 10 cards.
Compatible cards ioProx cards P10SHL, P20DYE and P40KEY
Certifications FCC
(1)
Reduced read range with keytag and Dye-Sub card.
4039
Access Control Section.qxd 1/30/03 10:14 PM Page 6