User`s manual

ManualsBrandsSeyeon ManualsHome building and DecorFW1170

FW1170 User’s Manual

M4046-01 1 Seyeon Tech Co., Ltd

FW1170 User’s Manual

(Product Guide)

Version 4.14(Rev.E)

April 13, 2012

Class A Digital Device (industrial & commercial environment)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE and

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Summary of content (12 pages)

PAGE 1
FW1170 User’s Manual FW1170 User’s Manual (Product Guide) Version 4.14(Rev.E) April 13, 2012 Class A Digital Device (industrial & commercial environment) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE and FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PAGE 2
FW1170 User’s Manual FW1170 User’s Manual Document Part Number: M4046-01 Document Version: 4.14(Rev.E) Revised: April 13, 2012 About This Document This document is prepared for users of FW1170 supplied by Seyeon Tech Co., Ltd. It is assumed that the users are familiar with Microsoft Windows operating systems and Web browsers such as Internet Explorer.
PAGE 3
FW1170 User’s Manual Contents 1. 2. PRODUCT OVERVIEW ......................................................................................................................... 4 1.1. FW1170 .......................................................................................................................................................................... 4 1.2. KEY FEATURES ..............................................................................................................................
PAGE 4
FW1170 User’s Manual 1. Product Overview 1.1. FW1170 FlexWATCH® 1170 is a stand-alone device transmitting vdeo from built-in megapixel camera over IP network. There is one type of FW1170 model: VO. It can transmit up to 30fps@VGA over the existing network. You can monitor video of FW1170 through web browser(ie. MS Internet Explorer), if FW1170 is connected to network. FW1170 supports video compression both MJPEG and H.
PAGE 5
FW1170 User’s Manual 1.2. Key Features Standalone device with a built-in web server 100M Auto-Sensing Ethernet Configuring and controlling through Web browser Max 30/25 fps transmission rate at maximum resolution Effective Bandwidth & Bit-rate Control (VBR/CBR) by H.264 Supports Dual Streaming in MJPEG and H.
PAGE 6
FW1170 User’s Manual 1.3. Technical Specification FW1170-VO Hardware 32bit Embedded CPU NAND Flash 128Mbytes/DDR2: 128Mbytes Linux version 2.6.xx operating system Battery backed up real-time clock Image sensor 1/4” optical format CMOS Sensitivity : 1500 mV/lux.sec MAX Active pixel resolution: 652x488 [Detail] S/N ratio: 46dB White Balance: AWB Lens 4.3mm F.2.0 lens Minimum illumination Color: 0.5 Lux (F2.0), B/W: 0.01 Lux(F2.
PAGE 7
FW1170 User’s Manual Built-in Motion detections Accuracy : 12x12=144 blocks Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive Management Configurable by serial, web or telnet Remote system update via telnet, FTP OR web browser Developer support Provides HTTP CGI API ActiveX control development kit PWR Supply SMPS Input : 100~240VAC, AC 50/60Hz, 300mA Output : DC 12 Volt, 1A PWR Consumption DC 12Volt Max 300 mA Operating Environment Temperature : 32° ~ 122°F (0° ~ 50°C) Humidity : 20 ~ 80%
PAGE 8
FW1170 User’s Manual 1.4. FW1170 Packing List FW1170-VO 1ea Power Supply Unit (Power Cable & SMPS DC12V 1A Adapter) 1ea CD (User’s Manual, IP Installer and etc) 1ea Table 2 : FW1170 Packing List Note: Please check all the listed items are included in your package. For any missing items, please contact your local distributor. M4046-01 8 Seyeon Tech Co.
PAGE 9
FW1170 User’s Manual 2. Hardware Description 2.1. Front View A C B D F E Picture 2 : Front View Name A MIC Description MIC for audio communication RED LED - POWER(turned on with power) GREEN LED – STATUS (turned on in case of IP setup completed, setup for uPnP.
PAGE 10
FW1170 User’s Manual 2.1. Top & Base view A Picture 3 : FW1170 Top & Base View B C Name D E Description A Upper Cap Can be removed for use of PIR Sensor (optional) B USB USB Port for Wireless Connection C CTL Conn. CTL Port D LAN LAN Connector E Power Conn. Power Connector Table 4 : FW1170 Top & Base View M4046-01 10 Seyeon Tech Co.
PAGE 11
FW1170 User’s Manual 2.1.1. CTL Port Description It’s RS-232 port for Serial input device, Modem or Console (Hyperterminal.connection). For RS-232 connection, RXD,TXD and GND are used. For connection to PC, RXD and TXD are used. RXD and TXD should be cross to communicate properly Picture 4 : CTL Port Description M4046-01 11 Seyeon Tech Co.
PAGE 12
FW1170 User’s Manual 3. FW1170 Installation and Basic Setup 3.1. Before Installation Read carefully User's Manual. Check User’s Network (IP Address, Network Mask and default gateway) Secure IP address for FW1170. 3.2. Factory Default Settings The following table shows the factory default condition. Please refer to this when you need to change the values on admin menu. Factory Default Admin ID Admin password IP address Network mask Gateway root root 10.20.30.40 255.255.255.0 10.20.30.