User`s manual

Network Video Recorder User’s Manual
Utilities
Utilities is to manage and control system properly. Save Configuration, Flash Update,
System Reboot and system upgrade options are provided.
1 Save Configuration
This is to temporally save all new configuration and settings in the system memory. Once
new configuration is saved by “Save Configuration” menu, new configuration will
permanently saved in the system memory only after system Reboot.
2 Reboot
Reboot is to permanently save all new configuration or settings in the system memory.
Thus, it is highly recommended to reboot the system after executing “Save
Configuration” menu.
Most of case system reboot come last only after all the new configuration is done. But
some of system menu require system reboot in the middle of system configuration so
that new setting can properly applied in the system.
Followings are list of option which require System reboot.
- Network Configuration
- Serial Port configuration
- Memory assignment for Advance Service
- Factory Default
 Note
System reboot requires about 1Minutes of lead time. Thus, if you execute Reboot option,
please wait at least 1minutes to do other settings.
3 Factory Default
Factory Default is to reset the system to start all the configuration from the factory
default status. This utility is recommended to use only when you lost all of your logics for
system configuration, since all of you setting will be lost by executing this option Except
Network configuration.
Seyeon Tech Co., Ltd
75