User`s manual

Network Video Recorder User’s Manual
B. Complete HDD Format
If the second-hand HDD is to be used for the NDVR server or HDD bad block check up is
required for more secure video recording, this option is highly recommended.
Simple Check “File system type” and check “ Check Bad Block” option and Press
“Partition and Format” button.
Note that “Check Bad Block” option take a few hours to complete the task. The bigger the
HDD, the longer the HDD format time. Thus, you need to count in the HDD format time
before executing this option.
1) Click “HDD Format” option in the HDD configuration menu in the Admin page.
2) Select file system and click “Partition and Format” button. If may takes 5~10
minutes to complete Disk format if it is 80GB HDD. If Bad Block check is required,
check “Check Bad Block” option.
3) Check out “HDD Information” and check out HDD status change after HDD format.
If still ‘None’ message, refresh your web browser by press [F5] key on your keyboard
or refresh button on web browser menu.
 Notice
Only Manufacture tested HDD is recommended for NSS, since NSS does not support any
HDD from any manufacturer. Please check available and manufacturer tested HDD List
from above.
1.2 Recording Mode
Two different recording mode is supported. One is “Circulation” and the other is “Pause at
full”.
Circulation mode: This is to overwrite new image over the old one when the HDD is full.
First in, first out based video overwriting will be done.
Pause at Full : This is to stop video recording when the disk is full.
1) Go to “Recording mode” menu in the Recording configuration window of Admin page.
2) Select the recording mode and click “Apply” button.
3) Once recording mode is set up go to “Disk Email Notification” mode to set up Email
function for HDD status report.
Seyeon Tech Co., Ltd
64