User`s manual

Network Video Recorder User’s Manual

HDD and manually install and format to start recording.

Please make sure that Network configuration should be done before

HDD installation

1) Shut down the system by turning off the power

2) Remove HDD Rack from the NSS and assemble HDD with HDD Rack

3) Insert the HDD Rack and lock the HDD Rack using key lock which come with HDD

Rack. If it is unlocked, no recording can be done.

4) Turn on the power of NVR server

5) Check out HDD format status by clicking “HDD Information” of HDD configuration

menu in the Admin page

 Note

It is highly recommended to procure and use HDD which are tested and approved by

manufacturer for its compatibility with NSS. Note that manufacturer can not guarantee

its compatibility with other HDD which is not shown below Supported Hard Disk Drive list

Please also note that no HDD from IBM or Western Digital is supported by the NDVR

server.

Supported Hard Disk Drive

Seyeon Tech Co., Ltd