User`s manual

Network Video Recorder User’s Manual
LAN : This is default path the send any data to outside.
Modem : when PSTN or other medium than LAN is used to send data to outside. This
service port must be checked when any data is to be sent through PSTN or other medium
than LAN which is connected to COM port.
 Note
Service patch must be set up and checked before starting WAN configuration to send any
data through external PSTN modem connection or equivalent
If LAN is to be used, select “None(LAN)” option.
8 AOIP Setup
AOIP (Always-On-IP) is a IP gateway through which user can access the FlexWATCH
TM
server when it is connected to Dynamic IP address. Thus, if the server should be
connected to the Dynamic IP network and you want to view live video from anywhere, it
is the right solution for you.
8.1 How to use AOIP service
Following is a step you need to take to use AOIP service
- Contact your local vendor or [e-mail] to get user account for
AOIP service.
- Register product in the AOIP server under your account
- Set up your network (Port mapping function of your router)
- Enable AOIP service option in the FlexWATCH
TM
server.
- Once things are set up, you can login to AOIP server and connect your
FlexWATCH
TM
server.
 Note
AOIP is proprietary data service run by FlexWATCH or its business partners around the
world. Thus, depending on the country AOIP service can run by your local vendor or
master distributor or in some case, you need to user AOIP server run by manufacturer.
More detailed information about how to use can be acquired by contact your local
distributor or [e-mail]
.
Seyeon Tech Co., Ltd
58