User`s manual

Network Video Recorder User’s Manual
When remote client is connected to the server through modem connection, physical line
connection will be done. But no way to view live video unless client run the web browser
of the FlexWATCH
TM
server.
Local IP address and Remote IP address is virtual IP address which is used at the time of
Modem connection only
Local IP address :
System default IP address (192.168.2.1) resides in the FlexWATCH
TM
server for modem
connection only. So when you connect the FlexWATCH
TM
server from remote PC using
dial-up networking and physical connection is made, you need to run your web browser
and enter this system default IP address(192.168.2.1) to view live video. You can
change this system default IP address as well. But it is recommended not to change
system default IP address for modem connection to prevent any possible error.
Remote IP address :
IP address which is automatically given to remote client PC by FlexWATCH
TM
server when
FlexWATCH
TM
server is connected by remote client PC using dial-up networking. This IP
address (192.168.2.2) is for data communication between FlexWATCH
TM
server and
Remote client PC. So you do not need to change this IP address. But if you change
default IP address of FlexWATCH
TM
server (192.168.2.1) for modem connection to
different class of IP address, you need to change remote IP address to the same class
of IP to match the IP class.
 Note that when Local IP address is change, remote IP address should be
changed into the same class of the IP address.
6 Network Status Notify
Network Status Notify is to send IP address of FlexWATCH
TM
server assigned by DHCP
server or ISP to mail recipient.
Network Status Notify option is use when you want to get changed IP address to the
server whenever the different IP address is assigned to FlexWATCH
TM
server.
Network Status Notify option can be used for following network environment.
• When the server is connected to PSTN Modem connection with Dial-up to
ISP by event
Seyeon Tech Co., Ltd
56