User`s manual

Network Video Recorder User’s Manual
Dial-out through standard PSTN modem is quite common and general.
1) Connect the server to PSTN line through RS-232 cable. Connect the cable to COM Port
or server. Use the standard D-Sub 9pin connector provided by PSTN modem.
2) Go to [WAN (PPP, Modem, etc)] menu in the Network configuration mode
3) Select “PPP client” option and fill out the option field.
PPP Client :
This means that FlexWATCH
TM
server act as client and call out to ISP.\
PPP Server :
This means that FlexWATCH
TM
server acts as a Server and receive a call from remote user.
Tel#, User ID and User password :
ISP phone number and user account for internet connection to ISP.
Default Route :
Enable this option. When Dial-out option is selected.
 Note
If you use external modem, we recommend ‘3COM U.S.Robotics 56K’ external
modem for better performance, although FlexWATCH
TM
server is designed to flexibly work
with different external modem from different manufacturer. If you are to use different
external modem from different manufacturer, we recommend you to contact your
Seyeon Tech Co., Ltd
54