User`s manual

Network Video Recorder User’s Manual

1) Connect your MODEM and AUX Port at FlexWATCH

server with RS-232 Serial cable.

2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration

3) Select ‘Modem’ at AUX mode and click ‘Apply’ button.

4) System reboot will be recommended, then click ‘Reboot’ button.

5.2 Application with Dial-in/out feature

5.2.1 Application with Dial-in

Dial-in is to allow server connection from remote client. This option is useful for the user

to connect the server at any time. Especially when the server send e-mail notification for

the alarm and user want to check the situation.

5.2.2 Application with Dial-out

Server can establish the internet connection through PSTN line and send FTP or e-mail

when the alarm condition is triggered by any event.

Following can be done through Dial-out function

• Pre/post alarm image sending through e-mail

• Pre/post alarm image sending to FTP server through FTP function

• Establish connection with AOIP server :

when the event is happened, server can send e-mail notification for the alarm and can

keep the connection with AOIP server, not terminating the connection with ISP.

Thus, you can quickly connect the server through AOIP server and view live video. The

key benefit of using AOIP connection is to view live video without making a separate call

to FlexWATCH

server whenever there is alarm and you can easily access the server. If

you are running FW-Manager software, live video will be automatically display on the FW-

manager screen when there is any alarm.

5.3 Dial Out configuration

This is to set up the system to make a call to ISP when the dial out condition is activated

to transmit live video or send e-mail or FTP image.

5.3.1 Dial-up through Standard modem

Seyeon Tech Co., Ltd