User`s manual

Network Video Recorder User’s Manual
1) Check whether you are in the DHCP environment before starting set-up.
2) Go to [Network Status Notify] menu in the network configuration mode
3) Set up e-mail account through which you would like to get IP address information
when the server is set up DHCP Client.
4) Now go to LAN configuration mode and select DHCP option
2.1.1.1 Server access through AOIP server
Once Server is registered in the AOIP server and DHCP is enabled, you can access the
server through AOIP server. IP address of server can be found from AOIP server as well.
In this case you do not need to configure e-mail address setting to get IP address from
the server.
Please contact your local vendor or manufacture to get more information about AOIP
server which is a IP gateway for Dynamic IP user.
1.3 PPPoE Configuration
Some DSL or Cable Modem based ISP provides PPPoE based internet connection service.
If FlexWATCH
TM
server must directly be connected to the external DSL or Cable modem,
PPPoE option must be enabled.
Note that you must open a way to get IP address information, since there is no way you
can get to know IP address of the server through web browser when the server is set to
PPPoE network. The only way you can get IP address is through e-mail or AOIP server.
Please refer to above DHCP client part to set up e-mail and AOIP connection.
Seyeon Tech Co., Ltd
47